Otto Bock C-Leg 3C98-3 Instructions For Use Manual page 20

7.3.1 Cockpit app navigation menu
7.4 Managing components
Connections with up to four different components can be stored in the app. However, a compon­
ent can only be connected to one mobile device at a time.
INFORMATION
Before establishing the connection, observe the points in the section "Initial connection between
Cockpit app and component" (see page 17).
7.4.1 Adding component
1) Tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the "Manage components" item.
3) Hold the prosthesis with the sole of the foot facing up, or connect and then disconnect the
battery charger, in order to activate recognition (visibility) of the Bluetooth connection for
2 minutes.
4) Tap the "+" button.
→ The Connection Wizard opens and guides you through the process of establishing a con­
nection.
5) Follow the subsequent instructions on the screen.
6) After the Bluetooth PIN is entered, a connection to the component is established.
→ While the connection is being established, three beep signals sound and the
appears.
The symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. This
process may take up to a minute.
The main menu will then appear with the name of the connected component.
20
Tap the symbol in the menus to display the navigation menu.
Additional settings for the connected component can be con­
figured in this menu.
Product
Name of the connected component
MyModes
Return to the main menu to switch MyModes
Functions
Call up additional functions of the component (e.g. turn off
Bluetooth) (see page 28)
Settings
Change settings of the currently selected mode (see page 25)
Status
Query status of the connected component (see page 28)
Manage components
Add or delete components (see page 20)
Imprint/Info
Display information/legal notices for the cockpit app
symbol