Parameter
Volume
8.3 Turning Bluetooth on the prosthesis on/off
INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (function
only available in basic mode) or by connecting/disconnecting the battery charger. Bluetooth is
then turned on for approx. 2 minutes. During this time, the app must be started and used to
establish a connection. If required, Bluetooth on the prosthesis can be switched on permanently
afterwards (see page 28).
8.3.1 Switching Bluetooth off/on using the cockpit app
Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Rotate the component or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started
in order to establish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the
8.4 Querying the prosthesis status
8.4.1 Query status through cockpit app
1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".
8.4.2 Status display in the cockpit app
Menu option
Trip: 1747
Step: 1747
Batt.: 68
28
Adjustment
Setting
software
range, app
range
0–4
0–4
symbol appears on the screen.
Description
Daily step counter
Total step counter
Current prosthesis charge
level, as a percentage
Meaning
Volume of beep signal for confirma
tion tones (e.g. when checking the
charge level, switching MyModes).
The "0" setting deactivates the aud
ible feedback signals. However, warn
ing signals are still generated if errors
occur.
Possible actions
Reset the counter by tapping
the "Reset" button.
For informational purposes
only
For informational purposes
only