CAUTION
Safety signal occurs (ongoing vibration)
Falling due to unexpected behaviour of the product because of changed damping behaviour.
►
Observe the warnings/error signals (see page 38).
Do not continue using the product after the safety signal has been emitted.
►
The product must be inspected by an authorised Ottobock Service Center. The O&P profes
►
sional is your contact.
4.9 Instructions for use with an osseointegrated implant system
WARNING
High mechanical loads due to normal or unusual situations, such as falling
>
Overloading of the bone, which can lead to pain, loosening of the implant, death of bone tis
sue or bone fracture, among other things.
>
Damage or breakage of the implant system or its components (safety components...).
Verify compliance with the fields of application, conditions of use and indications according
►
to the information of the manufacturers, both for the knee joint and for the implant system.
Note the instructions of the clinical personnel that indicated the use of the osseointegrated
►
implant system.
Note changes in your state of health that result in restrictions or doubt regarding the use of
►
the osseointegrated connection.
4.10 Information on the use of a mobile device with the cockpit app
CAUTION
Improper use of the mobile device
Falling due to changed damping behaviour as a result of unexpected switching to a MyMode.
Make sure you have been instructed in the proper use of the mobile device with the Cockpit
►
app.
CAUTION
Independently applied changes or modifications made to the mobile device
Falling due to altered damping behaviour as a result of unexpected switching to a MyMode.
Do not make any independent changes to the hardware of the mobile device on which the
►
app is installed.
Do not make any independent changes to the software/firmware of the mobile device that
►
are not included in the update function of the software/firmware.
CAUTION
Improper mode switching with the device
Falling due to unexpected product behaviour because of changed damping behaviour.
Ensure that you stand securely during all switching processes.
►
Verify the changed damping characteristics after switching and observe the feedback from
►
the acoustic signal emitter (beeper) and the display on the device.
Switch back to basic mode once the activities in MyMode have been completed.
►
NOTICE
Failure to observe the system requirements for the installation of the Cockpit app
Mobile device malfunction.
13