Function; Application; Indications For Use; Conditions Of Use - Otto Bock Genium 3B1-3 Instructions For Use Manual

2.2 Function

This product features microprocessor control of the stance and swing phase.
The microprocessor uses the measurements of an integrated sensor system as a basis to control
a hydraulic unit that influences the damping behaviour of the product.
These sensor data are updated and evaluated 100 times per second. As a result, the behaviour of
the product is adapted to the current motion situation (gait phase) dynamically and in real time.
The product can be individually adapted to your needs with adjustment software.
The product features MyModes for special motion types (e.g. cycling etc.). These are pre-con­
figured by the orthotics and prosthetics professional (O&P professional) using the adjustment
software and can be activated with special movement patterns and the Cockpit app (see
page 36).
In case of a product malfunction, safety mode makes restricted operation possible. Resistance
parameters that are predefined by the product are configured for this purpose (see page 39).
Empty battery mode permits safe walking when the battery is drained. Resistance parameters that
are predefined by the product are configured for this purpose (see page 39).
The microprocessor-controlled hydraulic unit offers the following advantages
• Approximation of the physiological gait pattern
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking
speeds
Essential performance of the product
• Stability in the stance phase
• Adjustable swing phase extension resistance

3 Application

3.1 Indications for use

The product is to be used solely for lower limb exoprosthetic fittings.

3.2 Conditions of use

The product was developed for everyday use and must not be used for unusual activities. These
unusual activities include, for example, extreme sports (free climbing, parachuting, paragliding,
etc.).
Permissible ambient conditions are described in the technical data (see page 42).
The product is intended exclusively for use on one user. Use of the product by another person is
not approved by the manufacturer.
The MOBIS classification describes the mobility grade and body weight, and makes it easy to
identify compatible components.
Knee joint with attached 2R20 AXON tube adapter
The product is recommended for mobility grade 2 (restricted outdoor walker),
mobility grade 3 (unrestricted outdoor walker) and mobility grade 4 (unrestricted
m°
outdoor walker with particularly high demands). Approved for a body weight of up
kg
to 150 kg (330 lbs).
Knee joint with attached 2R21 AXON tube adapter with torsion
The product is recommended for mobility grade 2 (restricted outdoor walker),
mobility grade 3 (unrestricted outdoor walker) and mobility grade 4 (unrestricted
m°
outdoor walker with particularly high demands). Approved for a body weight of up
kg
to 125 kg (275 lbs).
9