Information On Proximity To Certain Areas - Otto Bock Genium 3B1-3 Instructions For Use Manual

Make sure to observe any operating conditions and safety notices stipulated by the manufac­
►
turer of the implant.
NOTICE
Penetration of dirt and humidity into the product
Lack of proper charging functionality due to malfunction.
Ensure that neither solid particles nor liquids can penetrate into the product.
►
NOTICE
Mechanical stress on the power supply/battery charger
Lack of proper charging functionality due to malfunction.
Do not subject the power supply/battery charger to mechanical vibrations or impacts.
►
Check the power supply/battery charger for visible damage before each use.
►
NOTICE
Operating the power supply unit/charger outside of the permissible temperature range
Lack of proper charging functionality due to malfunction.
Only use the power supply unit/charger for charging within the allowable temperature range.
►
The section "Technical data" contains information on the allowable temperature range (see
page 42).
NOTICE
Independent changes or modifications carried out to the battery charger
Lack of proper charging functionality due to malfunction.
Have any changes or modifications carried out only by Ottobock authorised, qualified per­
►
sonnel.
NOTICE
Contact of the battery charger with magnetic data storage devices
Wiping of the data storage device.
Do not place the battery charger on credit cards, diskettes, audio or video cassettes.
►

4.6 Information on Proximity to Certain Areas

CAUTION
Insufficient distance to HF communication devices (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
Therefore, keeping a minimum distance of 30 cm to HF communication devices is recom­
►
mended.
CAUTION
Operating the product in very close proximity to other electronic devices
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
Do not operate the product in the immediate vicinity of other electronic devices.
►
Do not stack the product with other electronic devices during operation.
►
14