Choosing A Configuration Mode; H Configuring The Unit Using The Configuration Menus; Configuration Options - Paradyne HotWire 7985 User Manual

Choosing a Configuration Mode

Configuring the Unit Using the Configuration Menus

Configuration Options

7985-A2-GB20-00
3. Position the cursor in the System Contact field. Enter the name and contact
information for the person responsible for the unit.
The maximum length of System Contact is 128 characters.
4. Press Ctrl-a to switch to the screen function key area below the dotted line.
5. Select Save and press Enter.
You can make configuration changes either through a VT100 and the unit's
Configuration menus or by manually changing switches on the board. The unit
comes defaulted to allow settings to be made through the Configuration menus.
Use the Configuration menu branch of the unit to display or change configuration
option settings.
The Model 7985 Standalone Termination Unit is shipped with factory settings in
the Default Factory configuration area. You can find default information by:
H
Referring to Appendix A,
H
Accessing the Configuration branch of the Model 7985 Standalone
Termination Unit menu.
The Model 7985 Standalone Termination Unit has two sets of configuration option
settings. The Current Configuration matches the Default Factory Configuration
until modified and saved by the user.
Configuration Option Area
Current Configuration
Default Factory Configuration
If the factory default settings do not support your network's configuration, you can
customize the configuration options for your application.
October 1998
Initial Startup and Configuration
Configuration Option Tables
Configuration Option Set
The Model 7985 Standalone Termination Unit's active
set of configuration options.
A read-only configuration area containing the factory
default configuration options.
.
3-5