Ending A Session; Call Setup; Call Directories Screen - Paradyne 7610 User Manual

Start-Up

Ending a Session

Call Setup

Call Directories Screen

Î
3-6
Use the Exit function key from any screen to terminate the session.
Procedure
1. Press Ctrl-a to go to the screen function key area below the dotted line.
2. Save changes.
3. Select Exit and press Return. The Main Menu appears.
From the Control menu, Call Setup is available for the Management port when
connected to an external device, such as a modem or an X.25 PAD. Before
completing the Call Setup screen entries, the phone numbers need to be entered
on the Call Directories screen.
Use the Call Directories screen to enter or change the phone numbers used to:
Send out an ASCII alarm message to an ASCII terminal or printer.
Send out an SNMP trap message.
Connect to an NMS for dial-in management.
To access the Call Directories screen, follow this menu selection sequence:
Main Menu Control
main/control/directories
Device Name:
Primary Directory:
Phone Number: xxxxxxx
Alternate Directory:
Phone Number: xxxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
November 1996
Call Directories
CALL DIRECTORIES
Model: 7610
Clear
Clear
Î Î
Î Î
MainMenu Exit
7610-A2-GB20-00