Navigating The Screens; Keyboard Keys - Paradyne 7610 User Manual

User Interface Screens

Navigating the Screens

Keyboard Keys

2-4
You can navigate the screens by:
Using keyboard keys
Using screen function keys
Switching between the two screen work areas
Use the following keyboard keys to navigate within the screen.
To . . .
Move cursor between the screen area and the screen function
keys area below the dotted line at the bottom of the screen
Return to the previous screen
Move cursor to the next field on the screen
Accept entry or display valid options on the last row of the screen
when pressed before entering data or after entering invalid data
Move cursor one position to the left
Select the next valid value for the field
Delete character that the cursor is on
Move cursor up one field within a column on the same screen
Move cursor down one field within a column on the same screen
Move cursor one character to the right if in edit mode
Move cursor one character to the left if in edit mode
Redraw the screen display, clearing information typed in but not
yet entered
To make a menu or field selection:
Procedure
1. Press the tab key or the right arrow key to position the cursor on a menu or
field selection. Each selection is highlighted as you press the key to move the
cursor from position to position.
2. Press Return. The selected menu or screen appears.
3. Continue Steps 1 and 2 until you reach the screen you want.
November 1996
Press . . .
Ctrl-a
Esc
Tab
Return (Enter)
Ctrl-k
Spacebar
Delete (Del)
Up Arrow or Ctrl-u
Down Arrow or Ctrl-d
Right Arrow or Ctrl-f
Left Arrow or Ctrl-b
Ctrl-l
7610-A2-GB20-00