Assigning Ip Addresses And Subnet Masks; Choosing A Default Network Destination - Paradyne 7610 User Manual

IP Addressing

Assigning IP Addresses and Subnet Masks

Choosing a Default Network Destination

5-4
Once you select an IP scheme, assign an address(es) to the DSU.
If using . . .
The Management port as a management
interface
An external modem connected to the
Management port, and you want to
configure an alternate IP address and
subnet mask for dialing out traps using the
alternate alarm directory
The IMC
The SNMP NMS Security Options screen provides options to perform security
checking on the IP address of the SNMP management system attempting to
communicate to the DSU. Refer to
You can route an SNMP or Telnet session to a default network destination. To
configure a Default Network Destination, follow this menu selection sequence:
Main Menu Configuration
SNMP & Communication
Refer to Communication Protocol
November 1996
Then . . .
Assign the Management port IP address
and subnet mask. Refer to
Protocol Options, Table A-9.
Enter the alternate Management port IP
address and subnet mask. Refer to
Communication Protocol
Table A-9.
Assign the IP address and subnet mask.
Refer to Network Interface
Table A-2.
SNMP NMS Security
Load Configuration From
Communication Protocol
Options, Table A-9.
Communication
Options,
Options,
Options, Table A-11.
Edit
7610-A2-GB20-00