Call Setup Screen - Paradyne 7610 User Manual

Start-Up

Call Setup Screen

Î
3-8
Use the Call Setup screen to:
Initiate or disconnect an active call with an external device. External Device
Commands option must be set to AT or Other (not to Disable). Refer to
External Device Options, Table A-6.
Display the phone number entered on the Call Directories screen.
To access the Call Setup screen, follow this menu selection sequence:
Main Menu Control
main/control/setup
Device Name:
Directory: Primary
Phone Number: xxxxxxx
Dial
Disconnect
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Select: Primary, Alternate
After completing call setup, the Management port can be used to send out ASCII
alarms and SNMP traps. The Alarm & Trap Dial-Out option must be enabled.
Refer to Alarms & Traps
November 1996
Call Setup
CALL SETUP
Options, Table A-8.
Model: 7610
Î Î
MainMenu Exit
7610-A2-GB20-00