Paradyne 7610 User Manual page 108

MIB Descriptions
Asynchronous Port Table Objects
C-14
Table C-8. General Port Table Objects (2 of 2)
Object Description
rs232PortOut Contains the port's output
Speed speed in bits per second.
(rs232PortEntry 6 )
The rs232PortOutSpeed
object has the same values
as the rs232PortInSpeed
object.
1
The User Data port speed is a read-only value that can only differ from the DDS
network speed if the In-band Management Channel is enabled.
2
This speed is only valid when the port is configured for asynchronous operation.
The following are not supported:
rs232PortInFlowType (rs232PortEntry 7)
rs232PortOutFlowType (rs232PortEntry 8)
The Asynchronous Port Table Objects contains an entry for the Management port
when the port is configured for asynchronous operation and for the Terminal port.
For this unit, entries in the table that are counters (rs232AsyncPortEntry 6–8) are
used to collect statistics only and are not supported.
Table C-9. Asynchronous Port Table Objects (1 of 2)
Object Description
rs232AsyncPort Specifies the number of bits
Bits in a character.
(rs232Async
PortEntry 2 )
rs232AsyncPort Specifies the number of
StopBits stop bits supported.
(rs232Async
PortEntry 3 )
November 1996
Setting/Contents
Supports the following speeds for
the:
User data port: 64,000, 62,400,
60,000, 56,000, 54,400, 52,000,
1
48,000.
Management port: 2400
9600, 14,400, 19,200, 28,800,
38,400.
Terminal port: 2400, 4800,
9600,14,400, 19,200, 28,800,
38,400.
Setting/Contents
Supports only the following values:
7 – 7-bit characters
8 – 8-bit characters
Supports only the following values:
one(1) – One stop bit
two(2) – Two stop bits
one-and-half(3) – One and a half stop
bits
7610-A2-GB20-00
2 2
, 4800,