Paradyne 7610 User Manual page 128

O
objects for MIBs, C-1– C-18
OK, LED, 6-2
OOF, out of frame LED, 6-3
OOS, out of service LED, 6-3
options
configuration areas, 3-4
configuration tables, A-1– A-26
configuration worksheets, B-1– B-4
P
package checklist. See Start-Up Instructions
performance, network statistics, 6-8
phone number, for call directory, 3-7– 3-8
pin assignments, E-1– E-5
port
access, 4-1– 4-5
LEDs, 6-4
primary directory, 3-6– 3-8
protocols, link-layer, 1-4
R
rear panel, connections, 1-2
reset device, 7-7
RFCs, MIB descriptions, C-1– C-17
RIP option, 5-1– 5-4
RJ48S network interface cable, E-5
router, management data, 5-3
routing information protocol. See RIP
RS-232-Like MIB, C-2
RTS, request to send LED, 6-4
RXD, received data LED, 6-4
7610-A2-GB20-00
S
safety instructions. See Start-Up Instructions
saving option changes, 3-5– 3-6
screens, for user interface, 2-1– 2-6
security, 4-1– 4-6
self-test results, 6-7
session, telnet access, 4-1– 4-5
SNMP
access, 4-6
features, 1-2– 1-4
setup traps, 8-3
system entries, 3-2
traps, 3-6, 7-1, D-1– D-4
SNMP & communication, options, A-1, A-22
start-up
ATI, 3-1
instructions. See Document 7610-A2-GN10
statistics, of network performance, 6-8
status
indicators on front panel, 1-3
menu, 2-1– 2-2
network interface, 6-7– 6-8
of DSU, 6-5– 6-6
test messages, 7-5
subnet, IP addresses, 5-1– 5-4
system
device name fields, 3-2
LEDs, 6-2
options, A-1– A-4
November 1996
Index
IN-3