Front Panel Led Status Indicators; Snmp Dsu Features - Paradyne 7610 User Manual

Front Panel LED Status Indicators

7610 SNMP DSU
56/64K

SNMP DSU Features

7610-A2-GB20-00
Refer to the DSU LEDs section of Chapter 6.
System
The DSU offers the following standard features:
SNMP ( Simple Network Management Protocol ) Management. Provides
network management via an industry-standard SNMP management system.
In-band Management Channel (IMC). Provides remote management via
SNMP or Telnet session capability over the DDS network.
Async Terminal Interface (ATI). Provides a menu-driven VT100-compatible
interface for configuring and managing the DSU locally or remotely by Telnet
session or External Modem.
Local Management. Provides local management via an:
— Async terminal connection through the Terminal port
— NMS connection through the Management port
Remote Management. Provides remote management:
— Out-of-band, using an external modem through the Terminal port or
Management port
— Via Telnet through the Management port or the In-band Management
Channel (IMC)
DDS Rates. Operates at 56 and 64 kbps CC (clear channel).
LADS Operation (Local Area Data Set). Operates at 56 and 64 kbps
full-duplex (also called a limited distance modem).
Autorating of Line Rate. Establishes the line rate from the network receive
signal and automatically adjusts to the detected line rate.
Data Port Rates. Supports the same rates as the DDS or LADS operating
rates, except when the IMC is enabled.
November 1996
Network Port
About the SNMP DSU
496-15073
1-3