Standards Compliance for
SNMP Traps
SNMP Traps Overview
Trap: authentificationFailure
7610-A2-GB20-00
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following user interface traps, along with several enterprise-specific traps:
authenticationFailure
warmStart
linkUp
linkDown
SNMP Trap
Description
authenticationFailure
Failed attempts to access
the unit.
November 1996
D
Possible Cause
SNMP message not properly
authenticated.
Three unsuccessful attempts
were made to enter a correct
login/password combination.
IP address security is
enabled, and a message was
received from SNMP manager
whose address was not on the
list of approved managers.
There are no variable-bindings.
D-1