System Leds - Paradyne 7610 User Manual

Monitoring the DSU
Î
Î

System LEDs

6-2
main/status/leds
Device Name:
SYSTEM
OK ALARM TEST
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Refresh
When viewed via the ATI, the status display screen is updated approximately
every 5 seconds. Use Refresh to obtain a current status of all LEDs.
OK:
ON – DSU is operational.
OFF – DSU is performing a power-up self-test, has detected a system
failure, or there is no power.
ALARM:
ON – DSU has detected an alarm condition locally or from
the network. Refer to the
Chapter 8.
TEST:
ON – Test in progress. Test can be initiated locally, remotely,
November 1996
DISPLAY LEDS
NETWORK
DM OOS OOF NS
blinking
ESC for previous menu
Troubleshooting
or from the network. Includes power-up self-test.
Model: 7610
DTE
TXD RXD RTS CTS DTR
| |
blinking
Î Î
Î Î
MainMenu Exit
section in
7610-A2-GB20-00