Switching Between Screen Work Areas - Paradyne 7610 User Manual

User Interface Screens

Switching Between Screen Work Areas

Î
2-6
Selecting Ctrl-a allows you to switch between the two screen work areas to
perform all screen functions. To access the screen function area below the dotted
line:
Procedure
1. Press Ctrl-a to switch from the screen area to the screen function key area
below the dotted line. The available selections for the first input field appear
on the last line as shown below.
2. Select either the function's designated (underlined) character or press the tab
key until you reach the desired function key.
Example:
To leave the current screen, enter e or E ( Exit).
3. Press Return. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/configuration/edit/user/mgmt
Device Name:
Port Use:
Port Type:
Clock Source:
Data Rate(Kbps):
Routing Information Protocol: None
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Select: None, Net Link, Alarms.
November 1996
MANAGEMENT PORT OPTIONS
Model: 7610
Net Link
Synchronous
Internal
9.6
MainMenu Exit
7610-A2-GB20-00
Î Î
Î Î