Rs-232-Like Mib, Rfc 1659 - Paradyne 7610 User Manual

MIB Descriptions
ICMP Group
TCP Group
UDP Group
Transmission Group
SNMP Group
C-12
The ICMP (Internet Control Management Protocol) Group objects are fully
supported.
The TCP Group objects are fully supported, with the exception of tcpConnState
object, which will be read-only, since deleteTCB (12) is not supported and is the
only value which can be set.
The UDP Group objects are fully supported.
Objects in the Transmission Group are supported on the DDS network interface,
User Data port, Management port, and Terminal port. These objects are defined
through other Internet-standard MIB definitions rather than within MIB II.
Table C-7. Transmission Group Objects
Object Description
rs232 Supported on the User Data port, Management port, and
( transmission 33 ) Terminal port. Defined by the RS-232-like MIB (RFC 1659).
enterprise Supported on the DDS network interface by Paradyne
(transmission 22 ) Enterprise MIB.
The SNMP Group objects that apply to a management agent are fully supported.
The following objects apply only to an NMS and return a zero value if accessed.
snmpInTooBig (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)
snmpInTraps (snmp 19)
snmpOutGetRequests (snmp 25)
snmpOutGetNexts (snmp 26)
snmpOutSetRequests (snmp 27)
November 1996 7610-A2-GB20-00