Adding Boards To The Backplane - Matrox Supersight Installation And Hardware Reference

38 Chapter 3: Connecting devices to the backplane and to the Matrox Supersight SHB board

Adding boards to the backplane

Once you have removed the cover, you are ready to connect your board(s) to the
backplane. The following illustration shows the available board connectors on the
backplanes of the Matrox Supersight e2 unit and the Matrox Supersight Solo unit.
Matrox Supersight e2 backplane
Matrox Supersight Solo backplane
1. These PCIe connectors are only present on the 13 connector
variant of Matrox Supersight Solo.
SHB connector
PCIe connector
SHB connector
PCIe connectors
SHB connector
PCIe connectors
SHB connector
PCIe connectors
SHB connector
PCIe connectors
1
[