Default Hard Disk Drive - Matrox Supersight Installation And Hardware Reference

Hide thumbs Also See for Supersight:
Table of Contents

Advertisement

Warning

Default hard disk drive

The pre-installed hard disk drives have the following features:
• Supports up to a SATA 3.0 (6.0 Gbps), also referred to as SATA III or SATA 600.
• Storage capacity minimum: 500 Gbytes
*
• 2.5-inch platter
.
• Rotational speed: 7200 rpm
• SATA 3.0 (6.0 Gbps) connector.
• Hot-swappable.
• Shock, operating: 400 G 2 msec.
The hard disk drive is resistant to small and medium shocks or vibration, but can
be permanently damaged if subjected to excessive forces.
• Up to four 2.5" hard disk drives can be installed, one in each hard disk drive bay.
Note that, to create a RAID configuration inside your Matrox Supersight, you
must purchase and use 2.5" hard drives designed specifically for use in a RAID
configuration (which might have different specifications than those listed
above).
*. The hard drive specifications (for example, storage capacity, size, and rotational speed)
might change over time. Contact your Matrox sales representative for details.
*
.
*
.
Default hard disk drive
79

Advertisement

Table of Contents
loading

Table of Contents