Table of Contents
Advertisement
Optional installed components
You might have also purchased any of the following optional Matrox components
to complete the unit. Note that, typically, these components are pre-installed if
purchased at the same time as your Matrox Supersight unit.
Additional component
Matrox Supersight SHB
boards
Hard disk drives
❖ Note that to order these items separately, contact your Matrox sales representative.
Optional components
You might have also purchased any of the following optional Matrox components
to complete the unit. These will not come pre-installed.
Additional component
Add-on boards
USB and COM connector
I/O adapter bracket
Additional I/O adapter
bracket
❖ Note that to order these items separately, contact your Matrox sales representative.
Inspecting the Matrox Supersight package
Details
You can order up to 3 additional Matrox Supersight SHB boards for a Matrox
Supersight e2 unit.
You can order three additional SATA hard disk drives (for a maximum total of
four), along with its associated cabling. Note that, in a typical installation, one
hard disk drive for each SHB in your Matrox Supersight will come
pre-installed with an operating system.
Details
You can install PCIe boards. For third-party GPU boards, contact your Matrox
sales representative for the list of pre-qualified vendors.
This allows you to access the internal USB connectors and/or COM
connectors of the SHBs from outside of the chassis. These accessories vary
depending on SHB version.
Additional I/O adapter brackets might be available. depending on the adapter
board(s) you order.
19
Advertisement
Table of Contents
