Standard Components - Matrox Supersight Installation And Hardware Reference

Hide thumbs Also See for Supersight:
Table of Contents

Advertisement

18 Chapter 1: Before you begin

Standard components

The following components are included with your Matrox Supersight unit:
Standard package item
A Matrox Supersight unit
Additional parts
DVDs
Instructions to access this manual
*. The exact amount of storage and memory available might change over time. Contact your Matrox representative for more
details. The number of hard disk drives installed in the chassis is determined by your order and the number of Matrox
Supersight SHB installed. If you ordered more hard disk drives than Matrox Supersight SHB boards, the additional hard disk
drives are shipped as additional parts.
†. You can request a Matrox Supersight unit without a pre-installed CD-RW/DVD-ROM drive. Contact your Matrox representa-
tive for more details.
‡. Be aware that the additional parts that come with your chassis may change over time, and may vary depending on the
model of Matrox Supersight you have purchased.
**. The Matrox Supersight e2 unit comes with 4 PCIe/EPS power cables (with 6 + 2 connectors) either installed (one per
Matrox Supersight SHB installed) or bundled as additional components. With the Matrox Supersight Solo unit, one is
installed and the other 3 of these cables are bundled as additional components.
Details
Includes the following components pre-installed in a metal chassis:
• An SHB with memory modules
• A switched-fabric backplane.
*
• A mass storage device
with connection and power cable.
• Microsoft Windows 7 for Embedded Systems, 64-bit
(pre-installed on the mass storage device).
• A CD-RW/DVD-ROM 5-inch (slim) optical disk drive
associated connection and power cable.
• Three cooling fans and a power supply.
• One retainer bar and a bag of retainer clips (used to secure the
SHB to the unit).
• Additional PCIe/EPS power cable with 6+2 connectors
• One PS/2 connector and bracket.
• Two USB brackets with two USB connectors each.
• One L-shaped USB bracket for inside the chassis (does not
include USB connectors).
• Two HD9 brackets. One bracket comes with two HD9 connectors,
and another comes with one HD9 connector.
• One LP4 to SATA cable adapter.
Two DVDs are included with every Matrox Supersight unit:
• A DVD that includes Matrox Supersight system drivers, utilities,
applications needed to use Matrox Supersight, and a ReadMe file.
• A Microsoft Windows Rescue DVD.
--
*
.
and its
**
.

Advertisement

Table of Contents
loading

Table of Contents