Inside your Matrox Supersight
1 *
0
2
1
SHB connector 1
* Slot 1,
has
no corresponding connector. Th can be used for adapter brackets, or to fit double-wide boards.
† PCIe connectors 9-13 are not available on the 8-connector version of the Matrox Supersight Solo unit.
Adding boards to the Matrox Supersight Solo unit
When adding PCIe boards to the Matrox Supersight Solo unit, the following
critical points should be considered:
Solo
5
6
3
7
4
3
4
5
2
is
• For Matrox Supersight SHB-Q170, one PCIe 2.0 switch communicates through
a dedicated x16 interface. The second PCIe 2.0 switch communicates through a
dedicated x4 interface.
• Be aware that with Matrox Supersight SHB-Q170, when using it in the 13-slot
Matrox Supersight Solo backplane, the add-on boards connected to the SHB by
its x4 interface will have a more restricted transfer rate.
(from the front)
8
9 10
12 13 14
11
7
10
6
8
9
Adding boards to the backplane
†
Slots
PCIe
Backplane
connectors
11
12
13
43
Top
Bottom