Leds On The Bracket Of The Shb - Matrox Supersight Installation And Hardware Reference

LEDs on the bracket of the SHB

There are two network LEDs for each of the Gbit Ethernet connectors on the
bracket of each Matrox Supersight SHB-Q170.
Activity/link
LED
Gbit
LED
The following LEDs are available for each Gbit Ethernet connector on the SHB:
• Activity/link LED. The activity/link LED for the Gbit Ethernet connector turns
orange when the connector is connected to a network, and blinks during data
transfers. This LED shuts off when there is no connection present.
• Gbit LED. The Gbit LED turns yellow when the connector is using the
1000BaseT Ethernet network connection, and the LED turns light green when
the connector is using the 100BaseT Ethernet network connection. When this
LED is off, it indicates that the unit is using the 10BaseT connection, but only if
the activity/link LED is orange.
Operating states of the Matrox Supersight unit
Back panel
25
SHB-Q170
bracket