Adjustment Of Foldable Rops; Starting The Tractor; Operator's Seat - Kubota LX2620 Operator's Manual

OPERATING THE TRACTOR
3. Insert both set bolts and secure them with the hair
pins.
WARNING
To avoid personal injury or death:
• Make sure that both set bolts are properly
installed as soon as the ROPS is in the
upright position and secured with the hair
pins.
(1) Set bolt
(2) Hair pin

3. Adjustment of foldable ROPS

1. Adjust free fall of the ROPS upper frame regularly.
2. If you feel less friction in folding the ROPS, tighten
the nut (1) until you feel the right friction in the
movement.
(1) Nut

STARTING THE TRACTOR

1. Adjusting the operator's position.
NOTE :
• The seat and suspension should be adjusted
to ensure that the controls are comfortably
at hand for the operator, ensuring that the
48
OPERATING FOLDABLE ROPS (IF EQUIPPED)
operator maintains a good posture and
minimizes risks from whole body vibration.
• Operator's seat on page 48
• Seat belt on page 50
• Tilt steering adjustment [except LX2620SU] on
page 50
2. Set the parking brake.
• Parking brake lever on page 52
3. Starting the engine.
• STARTING THE ENGINE on page 40
4. Selecting light switch position.
• Headlight switch on page 50
• Turn signal switch and hazard light switch on
page 51
5. Pull the position control lever to raise the
implement.
• Position control on page 73
6. Selecting the travel speed.
• Range gear shift lever (L-M-H) on page 53
• Front wheel drive lever on page 54
7. Accelerate the engine.
• Hand throttle lever on page 54
8. Release the parking brake.
• Parking brake lever on page 52
9. Depress the speed control pedal.
• Speed control pedal on page 55
• Speed set lever [LX2620 ROPS model only] on
page 55
• Cruise control lever [LX2620 CAB model only]
on page 56

1. Operator's seat

WARNING
To avoid personal injury or death:
• Make adjustments to the seat only while the
tractor is stopped.
• Make sure that the seat is completely secured
after each adjustment.
• Do not allow any person other than the driver to
ride on the tractor.
IMPORTANT :
• After adjusting the operator's seat, confirm that
the seat is properly locked.
LX2620,LX2620SU