Key Operations For System Settings - Fuji Electric FSZ Instruction Manual

3.11.4. Key operations for system settings

Operation (example)
Display and keystrokes
1
Measurement display
Press and hold the ○ key
2
○ Key
3
○ Key
4
○ Key
5
○ Key
6
○ Key
7
○ Key
8
○ Key
9
○ Key
10
○ Key
11
○ Key
Press and hold the ○ key
12
○ Key
Press and hold the ○ key to go to Display 2.
Press the ▽ key three times and select "SET SYS".
Press the ○ key to go to Display 3.
LED display ON/OFF: ON, OFF
,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 4.
Transmission speed (baud rate): 9600 bps, 19200 bps, 38400 bps Note)
Press the △▽ keys to set the items.
Press the ○ key to go to Display 5.
Parity: None, Odd, Even Note)
, ,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 6.
Speed bit: 1-bit, 2-bit Note)
,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 7.
Station No. 1 to 31 Note)
Press the △▽ keys to set the values.
Press the ○ key to go to Display 8.
Setting the ID code:
When the fourth digit of the ID code blinks, it will enter into the input status.
Press the △▽ keys to set the values.
Press the ○ key to go to Display 9.
Setting the ID code:
When the third digit of the ID code blinks, it will enter into the input status.
Press the △▽ keys to set the values.
Press the ○ key to go to Display 10.
Setting the ID code:
When the second digit of the ID code blinks, it will enter into the input status.
Press the △▽ keys to set the values.
Press the ○ key to go to Display 11.
Setting the ID code:
When the first digit of the ID code blinks, it will enter into the input status.
Press the △▽ keys to set the values.
Press the ○ key to go to Display 8.
Press and hold the ○ key to go to Display 12.
Software version: FSZ1 01A
The version number indicated is a display example.
Press the ○ key to go to Display 13.
- 31 -
Description
, ,
Note) Does not come with communication function.