Key Operations For Status Settings - Fuji Electric FSZ Instruction Manual

3.10.4. Key operations for status settings

Operation (example)
Display and keystrokes
1
Measurement display
Press and hold the ○ key
2
○ Key
3
○ Key
4
○ Key
5
○ Key
6
○ Key
7
○ Key
8
○ Key
9
○ Key
10
○ Key
11
Measurement display
Press and hold the ○ key to go to Display 2.
Press the ▽ key once and select "SET DO".
Press the ○ key to go to Display 3.
DO1 output:Not used, all alarms, device error, process errors, range over/pulse
range over, negative flow direction, total flow pulse
, , , ,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 4.
DO1C: ON when operating, OFF when operating
,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 5.
DO2 output:Not used, all alarms, device error, process errors over/pulse range
over, negative flow direction
, , , ,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 6.
DO1C: ON when operating, OFF when operating
,
Press the △▽ keys to set the items.
Press the ○ key to go to Display 7.
Total rate:
FSZ08: 0.1, 1, 10, 100, 1000, FSZ15: 0.1, 1, 10, 100, 1000
FSZ25: 1, 10, 100, 1000, 10000 [L]
Press the △▽ keys to set the items.
Press the ○ key to go to Display 8.
Pulse width: 5 ms, 10 ms, 50 ms, 100 ms, 200 ms
Press the △▽ keys to set the items.
Press the ○ key to go to Display 9.
Burnout timer: 10 to 900 [sec]
Press the △▽ keys to set the values.
Press the ○ key to go to Display 10.
Press the ○ key to return to the measurement display.
- 29 -
Description
, ,
,