Emc Conformity - Fuji Electric FSZ Instruction Manual

EMC CONFORMITY: EMC Directive(2014/30/EU)
Emission measurements: EN IEC 61326-2-3:2021 and EN IEC 61326-1:2021
Requirements
Radiated emission
Immunity tests: EN IEC 61326-2-3:2021 and EN IEC 61326-1:2021
Requirements
Electrostatic discharge
Radiated, radio-frequency, electromagnetic field
Electrical fast transient/burst
Surge
Conducted disturbances, induced by radio-frequency
fields
Power frequency magnetic field
The performance criteria are according to EN IEC 61326-1:2021.
Performance criterion A
The equipment shall continue to operate as intended during and after the test. No DEGRADATION OF
PERFORMANCE or LOSS OF FUNCTION is allowed below a PERFORMANCE LEVEL specified in the user
documentation, when the equipment is used as intended. In the case of applying immunity tests with continuous
electromagnetic phenomena, the PERFORMANCE LEVEL may be replaced by a permissible LOSS OF
PERFORMANCE which shall recover, without user intervention. A permissible LOSS OF PERFORMANCE is allowed
within the PERFORMANCE LEVEL only when this information is clearly provided to the end user via documentation,
such as the product user manual. No change in the operating state is allowed nor is loss of data.
Performance criterion B
The equipment shall continue to operate as intended after the test. No DEGRADATION OF PERFORMANCE or
LOSS OF FUNCTION is allowed below a PERFORMANCE LEVEL specified in the user documentation, when the
equipment is used as intended. During the test, the equipment PERFORMANCE LEVEL may be replaced by a
permissible LOSS OF PERFORMANCE if such LOSS OF PERFORMANCE is detailed in the EMC test plan. A
permissible LOSS OF PERFORMANCE is allowed within the PERFORMANCE LEVEL only when this information is
clearly provided to the end user via documentation, such as the product user manual. An unintended change of the
operating state is allowed if self-recoverable. No loss of stored data is allowed.
Immunity tests specification
Test items
Electrostatic discharge
Radiated, radio-frequency,
electromagnetic field
Electrical fast transient/burst
Surge
Conducted disturbances, induced by
radio-frequency fields
Power frequency magnetic field

5.4. EMC CONFORMITY

Standard and limits
EN 55011:2016+A1:2017+A11:2020+A2:2021
Group 1, Class A
Basic EMC standard or test method
EN 61000-4-2:2009
EN IEC 61000-4-3:2020
EN 61000-4-4:2012
EN 61000-4-5:2014+A1:2017
EN 61000-4-6:2014
EN 61000-4-8:2010
Criterion Output fluctuation during the
tests
B N/A
A ±2% f.s.
B N/A
B N/A
A ±10% f.s.
A ±2% f.s.
- 49 -
Output fluctuation before and
after the tests
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.
±2% f.s.