Table of Contents
Advertisement
Danger: the power cables still have high voltage DC power from another battery module,
be careful to handle the Power plugs.
Danger: Les câbles d'alimentation sont toujours alimentés en CC à haute tension par
d'autres modules de batterie; vous devez manipuler les fiches d'alimentation avec soin.
3. Dismantle the 4 screws of the battery module's front face.
4.
Install the new control module (BMS). And reconnect all the cables. Refer to section 3.5.
5.
Turn on this battery string. Refer to section 3.6.
Caution:Before pulling out the communication cables be sure to mark the cable number,
avoiding cable wrong sequence.
Attention: Avant de débrancher les câbles de communication, vous devez marquer leurs
numéros afin d'éviter toute séquence incorrect.
90
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the M1C-UL9540 and is the answer not in the manual?
Questions and answers