Pylontech M1C-UL9540 User Manual page 55

3. Connect the System to the Internet
If Wi-Fi paired
with 10.10.10.1,
select Done
Select Distribution
Network to pair Dongle
with WIFI
Once you see this screen, go to
your DEVICE's Wi-Fi settings
and connect to the
Wi-Fi network that starts with:
EAP-#####
Password: "12345678"
Return to app once connected
Read and
confirm
conditions.
Select the local Wi-Fi network that will be
providing the internet connection to the
system.
Do NOT select the dongle's Wi-Fi
network.
It takes about 60sec for the lights to
turn on after setup
Conn d o Sol-
Conne
and S
rou bu not
or f all issu
51
If Location Services
are not enabled, it will
be requested.
The app will buffer for
a few seconds.
and has po
o In n
Conn o
(usually a V
You will receive
confirmation once
connection is established.