Priority Sending - Xerox WorkCentre Pro 412 User Manual

Priority Sending

Xerox WorkCentre Pro 412 User Guide
When the Priority Send is enabled, a high priority document
can be transmitted ahead of reserved operations. The
document is scanned into the memory, then transmitted when
the current operation is concluded. In addition, the Priority
Send will interrupt a broadcast operation between stations (i.e.,
when transmission to station A ends, before transmission to
station B begins) or between redial attempts.
½
Feed the document(s) face up into the ADF or place a
single document on the document glass face down.
½
Ensure the LCD displays the date and time (FAX mode). If
not, press the [Copy/Fax/Scan] key until FAX displays, then
press [Select].
½
Program any features required for the job.
½
Press [Menu/Exit] on the control panel.
½
Press or until 'PRIORITY SEND' appears, then
press [Select].
½
Enter the number of the remote machine using the numeric
keypad.
To enter the number you can also press [Speed Dial] and
enter the speed dial number, then press [Select].
½
Press [Select] to confirm the number.
½
The display asks you to enter an ID. If you want to assign a
name to the transmission, enter the name. If not, skip this
step.
For details on how to enter the name using the numeric
keypad, refer to Chapter 2 - Product Overview, page 2-8.
½
Press [Select].
The document will be scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
Page 5-27