Xerox WorkCentre Pro 412 User Manual page 81

Xerox WorkCentre Pro 412 User Guide
½
Enter the remote fax phone number using the numeric
keypad.
To enter the number, you can also press [Speed Dial] and
enter a speed dial number and press [Select].
½
Press [Select] to confirm the number.
The display asks you to enter the next fax number to send
the document to.
NOTE: If you have an operation stored in the memory which
requires the machine to send or receive to or from more than
one location, the machine will not allow additional fax numbers
to be entered here.
½
Press [Select] and enter another fax number using the
numeric keypad.
You can also press [Speed Dial] and enter a speed dial
number and press [Select]. Note that you cannot use Group
dial numbers for another fax number.
The number appears on the display.
½
Press [Select] to confirm the number.
½
To send to one location or when you complete the last fax
number setting, press [Menu/Exit].
The document will be scanned into the memory before
transmission.
The display shows the memory capacity and the number of
pages being stored in the memory, then the machine begins
sending the document in order of the numbers you entered.
NOTE: For an original fed from the document glass, the
display asks if you want to feed another page. Using the
navigation keys, select [1:YES] or [2:NO] and press [Select].
When you have finished scanning all the originals, select
[2:NO] and press [Select] to send the fax.
Page 5-15