Reduce/Enlarge; Output - Xerox WorkCentre Pro 412 User Manual

Reduce/Enlarge

Output

Page 3-12
You can reduce or enlarge the size of a copied image from
25% to 400% using the document glass or from 25% to 100%
using the ADF.
NOTE: The percentage available is different according to the
document loading method.
½
Press [Reduce/Enlarge] on the control panel repeatedly
until 'REDUCE/ENLARGE' displays on the LCD.
½
Enter the required percentage using the numeric keypad.
NOTE: Use leading zero's to ensure three digits are entered
e.g. enter 050 to program a 50% reduction.
If you press [Clear/Clear All], the selected percentage
returns to 100%.
½
Press [Select] to save the selection.
When the Output feature is On, the machine collates the copy
job into sets. For example, 2 copies of a 3 page job will print
one complete document followed by the second complete
document (e.g. 1, 2, 3 then 1, 2, 3).
NOTE: If producing multiple collated sets, use the document
feeder to scan the originals.
½
Press [Output] on the control panel to display the current
setting.
½
Press [Output] to select 'ON'.
½
Press [Select] to save the setting.
Xerox WorkCentre Pro 412 User Guide