Fcc Regulations - Xerox WorkCentre Pro 412 User Manual

FCC Regulations

Page A-10
Send Header Requirements
Federal Communications Commission (FCC) regulations
require all persons within the United States who send any
message via a facsimile machine to include an identifying
message in the transmission. The message must clearly
contain an identifier and telephone number for the entity
(business or individual) sending the message.
This facsimile machine provides the local ID and name
features required for the FCC regulation. To satisfy the FCC
regulation, the telephone number and name must be included
with the printed document. To comply with the FCC rules,
carefully read and follow the instructions listed in this document
to program the local ID and name.
Data Coupler Information
This Xerox machine contains an internal data coupler. Its use
is restricted by the FCC (Federal Communications
Commission). To comply with the FCC rules, you must
carefully read and follow the instructions listed below.
This equipment complies with Part 68 of the FCC rules. On the
rear of this equipment is a label that contains, among other
information, the FCC registration number and Ringer
Equivalence Number (REN). If requested, provide this
information to your telephone company.
The REN is useful to determine the quantity of devices you
may connect to your telephone line and still have all of those
devices ring when your number is called. In most, but not all
areas, the sum of the RENs of all devices should not exceed
five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should call
your local telephone company to determine the maximum REN
for your calling area.
Xerox WorkCentre Pro 412 User Guide