Select The Paper Supply - Xerox WorkCentre Pro 412 User Manual

2. Select the Paper Supply

Xerox WorkCentre Pro 412 User Guide
You can copy to a size of media as large as a sheet of legal
size (216 x 356 mm / 8.5 x 14 inch) paper. For full media
specifications, refer to Appendix B - Specifications.
The instructions for loading this media are the same whether
you are printing, faxing, or copying.
HINT: For instructions on how to load media, refer to Chapter
7 - Maintaining the Product, page 7-14.
½
Select the required paper supply source by pressing [Paper
Supply].
½
If you are using the cassette, press [Paper Supply] until the
LCD displays 'CASSETTE'.
½
If you are using the bypass tray to load special print media,
press [Paper Supply] until the LCD displays 'BYPASS'.
½
Press [Select] to save the required selection.
NOTE: When feeding media through the Bypass Tray the
paper size option in System Data Settings must be set to the
correct size. If feeding media smaller than A4/Letter, the
setting can remain set at A4, Letter or Legal size. Refer to
Chapter 9 - System Setup, page 9-6 for instructions.
Page 3-3