Manual Dialing; Redial - Xerox WorkCentre Pro 412 User Manual

Manual Dialing

Redial

Page 5-16
½
Feed the document(s) face up into the ADF or place a
single document on the document glass face down.
½
Ensure the LCD displays the date and time (FAX mode). If
not, press the [Copy/Fax/Scan] key until FAX displays, then
press [Select].
½
Program any features required for the job.
½
Press [Manual Dial] on the control panel. The dial tone will
be audible.
½
Enter the remote fax phone number using the numeric
keypad.
½
When you hear the fax tone from the remote machine,
press [Start] to begin sending.
To Redial the Last Number:
½
Ensure the LCD displays the date and time (FAX mode). If
not, press the [Copy/Fax/Scan] key until FAX displays, then
press [Select].
½
Press [Pause/Redial]. If a document is loaded in the ADF or
on the document glass, the machine automatically begins to
send.
To Search Redial Memory:
½
Ensure the LCD displays the date and time (FAX mode). If
not, press the [Copy/Fax/Scan] key until FAX displays, then
press [Select].
½
Press and hold [Pause/Redial] for 2 seconds.
The Redial memory in your machine retains the last 10
numbers called. If you have dialed the same number multiple
times, the machine does not count the duplicates.
Xerox WorkCentre Pro 412 User Guide