Load The Originals - Xerox WorkCentre Pro 412 User Manual

3. Load the Originals

Page 3-4
A choice of document input areas is available. These are:
- An automatic document feeder (ADF) for multiple
originals.
- A document glass for single originals or bound originals.
Automatic Document Feeder (ADF)
Using the Automatic Document Feeder (ADF), you can load up
to 30 documents in one job. Ensure documents are in good
condition, and that all staples and paper clips have been
removed. Ensure any glue, ink or correction fluid on the paper
is completely dry before loading the documents.
Originals should be between 45 g/m
and 28 lb), and between B5 (182 x 257 mm / 7 x 10 inch) and
Legal size (216 x 356 mm / 8.5 x 14 inch).
Do not attempt to feed the following types of documents into
the Automatic Document Feeder:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
Do not load documents containing different sizes or weights of
paper.
NOTE: If your document falls into any of these categories, use
the document glass only.
2
and 105 g/m
Xerox WorkCentre Pro 412 User Guide
2
(12.5 lb