Setting The Date And Time - Xerox WorkCentre Pro 412 User Manual

Setting the Date and Time

Xerox WorkCentre Pro 412 User Guide
The current time and date are shown on the display when the
machine is on and ready for faxing (Standby mode). The time
and date are printed on all faxes you send.
½
Press [Menu/Exit] on the control panel. The display shows
the first menu; SYSTEM DATA.
½
Press or until 'DATE & TIME' appears, then press
[Select].
½
Enter the correct date and time using the numeric keypad:
Day
Month
Year
Hour
Minute
The date and time is entered and displayed in the following
order:
MM
DD
YY
HH:
MM
You can also use
digit you want to correct, then enter a new number.
½
To select AM or PM for 12-hour format, press
½
Press [Select] when the time and date on the display is
correct.
If you enter an invalid number, the machine beeps and does
not proceed to the next step. If this happens, just re-enter the
correct number.
The display shows the time and date you have set, then
returns to Standby mode.
= 01 ~ 31
= 01 ~ 12
= 00 ~ 99
= 00 ~ 23 (24-hour mode)
= 01 ~ 12 (12-hour mode)
= 00 ~ 59
= Month
= Day
= Year
= Hour
= Minute
or to move the cursor under the
or .
Page 2-25