Xerox WorkCentre Pro 412 User Manual page 104

½
Remove all staples and paper
clips before placing the
originals into the document
feeder.
½
If necessary, adjust the sliding
document guides to the paper
size required.
½
Insert the originals neatly into
the document feeder, face up.
The first page should be on
top with the headings towards
the back or left of the
machine.
½
Align the stack with the left
and rear edges of the
document feeder tray and
adjust the guides to just touch
the front and rear edges of
the originals.
Page 6-4
Do not attempt to feed the following types of documents into
the Automatic Document Feeder:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
Do not load documents containing different sizes or weights of
paper.
NOTE: If your document falls into any of these categories, use
the document glass only.
Document guides
Xerox WorkCentre Pro 412 User Guide