Xerox WorkCentre Pro 412 User Manual page 171

Option
Power Save
ECM Mode
RX Reduction
Discard Size
Redial Interval
Redials
Answer On Rings
Xerox WorkCentre Pro 412 User Guide
The power saving menu item lets you reduce power usage when
the machine is idle.
Select ON to turn this feature on. The LCD prompts you to
choose the length of time the machine waits after a job is printed
before it switches to a reduced power state.
Select OFF to turn this feature off. It keeps the machine ready to
print with minimum warm-up time.
Error Correction Mode compensates for poor line quality.
Options are ON or OFF. If the line quality is poor, transmission
time may be increased when ECM is enabled.
When receiving a document as long as or longer than the paper
installed in your machine, the machine can reduce the size of
the document to fit the paper size in the WorkCentre Pro 412.
Use this feature if you want to automatically reduce an incoming
page. If the WorkCentre Pro 412 cannot reduce the document to
fit onto one page, the document is divided and printed at actual
size on two or more pages. With Horizontal Reduction enabled,
the machine reduces an incoming document along the vertical
axis only.
When receiving a document as long as or longer than the paper
installed in your machine, you can set the fax machine to discard
any excess at the bottom of the page. If the received page is
outside the margin you set, it will print on two sheets of paper at
the actual size.
If the document is within the margin, and the Auto Reduction
feature is turned ON, it will be reduced to fit into the appropriate
size paper (discard does occur). If the Auto Reduction feature is
turned OFF or fails, the data within the margin will be discarded.
Settings range from 0 to 30 mm.
WorkCentre Pro 412 can automatically redial a remote fax
machine if it was busy. Intervals from 1 to 15 minutes can be
entered.
Specifies the number of redial attempts (from 0 to 9) the
WorkCentre Pro 412 will attempt.
Specifies the number of times WorkCentre Pro 412 rings (1 – 7)
before answering an incoming call.
Description
Page 9-7