Xerox WorkCentre Pro 412 User Manual page 91

Xerox WorkCentre Pro 412 User Guide
½
The display asks you to enter an ID. If you want to assign a
name to the transmission, enter the name. If not, skip this
step.
For details on how to enter the name using the numeric
keypad, refer to Chapter 2 - Product Overview, page 2-8.
½
Press [Select].
The display shows the current time and asks you to enter the
start time when the fax is to be sent.
½
Enter the time by using the numeric keypad.
To select AM or PM for 12-hour format, press
you set a time earlier than the current time, the document will
be sent at that time on the following day.
½
Press [Select] when the start time displays correctly.
The document will be scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
NOTE: For an original fed from the document glass, the
display asks if you want to feed another page. Using the
navigation keys, select [1:YES] or [2:NO] and press [Select].
When you have finished scanning all the originals, select
[2:NO] and press [Select].
½
The machine returns to Standby mode and the LCD
reminds you that you are in Standby mode and that Delayed
Transmission is set.
NOTE: For instructions on canceling a delayed send
transmission, refer to "Canceling a Schedule Transmission"
on page 5-32.
or . If
Page 5-25