Xerox WorkCentre Pro 412 User Manual page 157

Frequent copy paper jams
Toner yield is lower than
expected and TONER LOW
message appears in the LCD
Fewer copies from the Toner
Cartridge than expected
Xerox WorkCentre Pro 412 User Guide
Condition Suggested Solution
Fan the stack of paper, then turn it over in the
cassette. Replace paper in paper cassette with
a fresh supply. Check/adjust paper guides.
Ensure that the paper is the proper paper weight
2
80 g/m (20 lb) bond paper is recommended.
Check for copy paper or pieces of copy paper
remaining in the product after a paper jam has
been cleared.
Toner may be lodged in the cartridge. Remove
the toner cartridge. Shake the toner cartridge
and tap along the top of the toner cartridge over
a waste receptacle. Take care not to touch the
exposed toner on the left side of the cartridge.
Originals contain pictures, solids, or heavy lines.
Originals are forms, newsletters, books etc. The
product is being powered on and off frequently.
The document cover is being left open while
copies are being made.
Page 8-17