Xerox WorkCentre Pro 412 User Manual page 105

½
Raise the document glass
cover.
½
Position the original face down
on the document glass. Align it
with the registration arrow in
the rear left corner.
NOTE: Ensure that no documents
are loaded in the ADF. If a
document is detected in the ADF,
the document has a priority than
the document on the glass.
½
Lower the document glass
cover.
NOTE: On completion of a job
ensure the document glass cover
is fully closed.
Xerox WorkCentre Pro 412 User Guide
Document Glass
The document glass should be used for single pages or bound
originals up to a maximum size of Legal size (216 x 356 mm /
8.5 x 14 inch).
Page 6-5