Mitsubishi MELSEC-A AD57G-S3 User Manual page 243

•
•
5. MONITOR FUNCTIONS AND THEIR USE
MELSEC-A
(4) Operations if the printer is not connected
If the printer is not connected, a time out occurs about 30 seconds after
the operation starts.
(In the meantime, other monitoring continues.)
The occurrence of the time out can be confirmed by using the system
alert screen (see Section 10.8).
[Monitor screen creation]
See Monitor screen creation in Section 5.4.5 .
• Settings by using the AD57GPE
When settings are done in the announcements setting window,
select ON in the printer item.
Settings by using the PC CPU
The monitor conditions are set so that the bit device to print out an-
nouncement messages is turned ON .
[Range in which monitoring conditions are set and the number of possible settings]
See Section 5.4.5.
IREMARKI
The following table shows the relationship between the display and the printing of an operator's
comment using the error alert display function and the announce function.
~
Settings
Error Alert Display Settings (See Section 5.4.5.)
Monitor Screen with Settings 18 Dls- Monitor Screen without Settings Is Dis-
played. played.
Announce
Setting
Announce Setting
Announce Setting
Refer-
ences
Provided
Not
Provided
Not
Provided
Provided
Operations
An alert A normal An alert A normal
Monitoring
message message
message
rneasaqe
is
is is
IS
registered.
registered. registered. registered.
Display on Error alert
the message
Section
monitor
is dis-
5.4,5
screen played.
An-
An- An- An- An-
nouncement nouncement nouncement nouncement nouncement
Section
display message message message message
'0.4
(system is high- is dis-
is high- is dis-
menu) lighted. played. lighted, played.
Output an-
nouncement
to a printer An announcement mes- An announcement mes-
Section
(when the sage is output.
sage is output.
5.'0
printer is
set to ON)
- - - : means no processing.
5-163