Table of Contents
Advertisement
5. MONITOR FUNCTIONS AND THEIR USE
MELSEC-A
(2) Settings by using the AD57GPE
Monitoring conditions in the Edit report file window, the Set report
parameter window, and the Set report (Printing allocation) window must
be set.
The monitoring conditions that should be set at each setting item of these
windows are explained below.
The Operating Manual gives details about item setting methods.
(a) Edit report file window
Section 5.9.(4) gives details about how to set these items.
Edit report file window
1)
Report file
I
2
ReportNo.
4
•
3
4
5
6
7
B
5)
I
P·MTA
Delete
End
Stop
Monitoring Condition Setting Description
Number
Setting Item
Setting Contents
1)
Report file
The report file ([][][
l.seR)
set in the report file area of the Edit report file window is
automatically displayed.
2)
Screen No.
The report canvas screen number (number of the screen drawn by the GEDE) registered
in the report file displayed in 1) is automatically displayed.
3)
Report title
When a report canvas screen is created by the GEDE. the screen title registered to each
report canvas screen is automatically displayed.
Set the number (number of pages) of report canvas screens that are allocated to the
4)
Report No.
report.
The report number is initially set to one page per report (1 report/1 report canvas screen)
in the Edit report file window.
5)
P-MTR
The monitoring condition for a report (report canvas screen) is set by moving the
highlighted bar to the one selected. (Select after setting above 4).)
5-154
•
Advertisement
Table of Contents
