Table of Contents
Advertisement
•
•
3. SPECIFICATIONS
MELSEC·A
(1) When the CRT display wavers, take one of the following corrective actions:
Make sure to ground the CRT if the CRT has a ground terminal.
If the CRT does not have a ground terminal, ground the FG terminal of the PC.
(2) For an analog RGB cable, use the following cable:
UL20276-SB (SP23-23352A)
a-core
combination cable.
(When
it
is difficult to get this cable, use a different cable, Change the connector on the
CRT side and replace the CRT connector of the AC30AV/AC300AV.)
3-7
Advertisement
Table of Contents
