Table of Contents
Advertisement
CONTENTS
PART 1
GENERAL DESCRIPTION OF THE AD57G-S3
Section 1
This section explains the procedure from creating a monitor screen to execut-
ing monitoring.
PART 2
SPECIFICATIONS AND SETTING OF AD57G
Sections 2 to 4
This section explains specifications, functions, system configuration with the
module, switch settings of the module, mounting, and installation.
PART 3
DESIGNING MONITOR SCREENS
Sections 5 to 7
This section explains monitor functions used to design monitor screens,
restrictions when using a monitor function, and restrictions when conducting
drawing.
PART 4
PROCEDURE BEFORE STARTING MONITORING OPERATION
AND THE REQUIREMENTS FOR EACH OPERATION
Section 8
This part explains (a) the procedure for drawing monitor screens, (b) execut-
ing monitoring, and (c) the requirements for each operation.
PART 5
OPERATIONS AFTER STARTING UP THE AD57G
Sections 9 to 11
This part explains (a) STOP mode operations, (b) system menu operations in
the monitor mode, and (c) monitor mode storage devices operations.
These operations are done after starting up the AD57G.
PART 6
SOFTWARE PACKAGES
Section 12
This part explains the types and names of software packages used with the
AD57G.
PART 7
FAULT DIAGNOSiS
Sections 13 to 14
This part explains (a) how to read the error codes and messages displayed
on the monitor screen (a) how to carry out corrective actions and items to
check during troubleshooting.
PART 8
APPENDICES
APPENDECES 1 to 8
This part explains memory capacity setting for monitor screen data, memory
capacity required for a memory card, processing times, compatibility with
previous G-controller modules, recommended operation panels, external
dimensions, and recording/drawing paper.
-i-
•
•
Advertisement
Table of Contents
