Table of Contents
Advertisement
5. MONITOR FUNCTIONS AND THEIR USE
MELSEC-A
(c) Set report (Printing allocation) window
After selecting "Printing allocation" in the Set report (Printing alloca-
tion) window and displaying a report canvas screen, this window can
be displayed.
Sections 5.9(2), (6) and (8)(a) to (c) give details about item setting.
Set report (Printing allocation) window
1)
2)
3)
4)
5)
jMH&mHgg1gHEmMN@iia¥a.~aW#tmitw~):iii~MafMgfWW#@@HHJMnNF¥f~
I
Display position
I
R:
0
(1·25)
c.
0(1.80)
Print
type
I
Print time
I I
Log
time
I I
Log
data
I
Common setting
Time series:
I
Old
I I
New
I
Record No.
c:::::::::J
(1·5001
I
Logging
data
I
PC
I
I
Device
I
I
I
Format
I I
16
bit
I I
32
bit
I
I
Delete
I I
End
I I
Stop
I
•
Monitoring Condition Setting Description
Number
Setting Item
Setting Contents
1)
Print position
Set the printing position of the data selected in 2) on each report canvas screen.
It is also possible to directly input numerical values to the R (line) and C (column) areas.
Select the type of print data to be printed to the position set in I}.
Print time
:
Printing the starting time and date of collected data
2)
Print type
log time
:
Time and date when print data were collected
Log data
:
Data collected from the device set in 4) (Numerical value)
3)
-
-
When log data is selected in 2), set the device that collects data to be printed to the
4)
logging data
position set in 1) in the monitored device setting window.
If Print time or log time are selected in 2), it is not necessary to set this item.
When log data is selected in 2), set the following in the display format (input) setting
window.
Data type
:
Set the unit of data collected from the device of 4) to 16 bits (1 word)
or 32 bits (2 words).
Number of
Set the number of numerical characters per line when the collected
display (input)
data is printed out in decimal.
columns
:
(If the data contains signs and decimal points, they must be included.)
5)
Format
16-bit data :1-8 columns
(*1 )
32-bit data :1-13 columns
Code
:
Set collected data to coded or uncoded data.
Decimal point
If collected data is printed with a decimal point, set the printing
position
:
position of the decimal point.
16-bit data :0 to 5 digits from the lowest digit
}
When data is 0, it is
32-bit data :0 to 10 digits from the lowest digit
not necessary to
set a decimal point.
*1 During monitoring, when the value in the collected data printed out in decimal is less than
the number of set columns, the columns for the irrelevant higher digits are ignored.
When the value in the collected data is more than the number of set columns, the printout
is executed for the actual value.
5-146
•
Advertisement
Table of Contents
