FX-TRN-BEG-E
2.5.6
I/O Image Table for Virtual PLC
The status of the virtual PLC, the Inputs, and Outputs are monitored here.
2.5.7
Operation Panel
The configuration of the operation panel for each exercise differs.
I/O device numbers shown correspond to the ones on the specific virtual manufacturing cell.
Green indicates the RUN status.
Gray indicates the STOP status.
Red indicates the ON status.
Gray indicates the OFF status.
Lamp display
Lit by outputs from the virtual PLC.
Operation switches
Used to operate the machine in the simulation.
Switches
Hold the ON or OFF status.
Turn ON and OFF with the mouse.
Pushbuttons
Turns the input ON while the button is pressed.
Outline of the Lesson Plan 2
A-16