Centrifugation With Time Preselection; Short-Term Centrifugation - Hettich ROTINA 380 Operating Instructions Manual

Operation
6.7.2

Centrifugation with time preselection

6.7.3

Short-term centrifugation

32 / 63
[STOP/OPEN] button to end the centrifugation run.
3. Press the
�� Ramp-down takes place with the selected ramp-down parameter.
The ramp-down parameter is displayed.
The right side of the
centrifuge is in ramp-down.
The left side of the
at a standstill.
The light on the
OPEN] button go out.
Personnel:
■
Trained user
1. Set centrifugation parameters or retrieve a program or a program link.
[START] button.
2. Press the
�� The centrifugation run is started.
[START] button flashes until the rotor is read in.
The
[START] button lights up during the centrifugation run.
The
The rotor speed or the resulting RCF value, the temperature in
the centrifuging chamber (only for centrifuges with cooling) and the
remaining time are displayed during the centrifugation run.
3. Ramp-down takes place with the selected ramp-down parameter
after the time has elapsed or if the centrifugation run is cancelled.
�� The ramp-down parameter is displayed.
The right side of the
centrifuge is in ramp-down.
The left side of the
at a standstill.
The light on the
OPEN] button go out.
Personnel:
■
Trained user
1. Press and hold the
[START] button flashes until the rotor is read in.
�� The
[START] button lights up during the centrifugation run.
The
Timing starts at 00:00.
The rotor speed or the resulting RCF value, the temperature in
the centrifuging chamber (only for centrifuges with cooling) and the
elapsed time are displayed during the centrifugation run.
Rev.: 04 / 11.2023
[STOP/OPEN] button lights up when the
[STOP/OPEN] button lights up when the rotor is
[START] button and the right side of the [STOP/
[STOP/OPEN] button lights up when the
[STOP/OPEN] button lights up when the rotor is
[START] button and the right side of the [STOP/
[START] button.
AB1701en_SA