Centrifugation Data Displayed After Switching On; Setting A Temperature Unit (For Centrifuges With Cooling) - Hettich ROTINA 380 Operating Instructions Manual

Software operation
7.6.9

Centrifugation data displayed after switching on

7.6.10

Setting a temperature unit (for centrifuges with cooling)

50 / 63
[START] button.
7. Press the
�� The setting is stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the 'Settings menu'
8. Press the
or
[STOP/OPEN] button twice to exit the '***Machine Menu***' .
Press the
The centrifugation data of program 1 or the last program used is displayed
after switching on.
1. Press and hold the
'***Machine Menu***' is displayed after 8 seconds.
��
[PROG] button repeatedly until '-> Settings' is displayed.
2. Press the
[START] button.
3. Press the
'SOUND / BELL = on' or 'SOUND / BELL = off' is displayed.
��
[PROG] button repeatedly until 'Start program = Last' or
4. Press the
'Start program = First' is displayed.
5. Use [Rotary knob] to set 'Last' or 'First' .
Last = last program used
First = program 1
[START] button.
6. Press the
�� The settings are stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the 'Settings menu'
7. Press the
or
[STOP/OPEN] button twice to exit the 'Machine Menu' .
Press the
The temperature can be entered in degrees Celsius (°C) or degrees Fahren-
heit (°F).
1. Press and hold the
'***Machine Menu***' is displayed after 8 seconds.
��
[PROG] button repeatedly until '-> Settings' is displayed.
2. Press the
3. Press the [START] button.
'SOUND / BELL = on' or 'SOUND / BELL = off' is displayed.
��
[PROG] button repeatedly until 'Temp Unit = Fahrenheit' or
4. Press the
'Temp Unit = Celsius' is displayed.
[Rotary knob] to set 'Celsius (°C)' or 'Fahrenheit (°F)' .
5. Use
Celsius = values in Celsius (°C)
Fahrenheit = values in Fahrenheit (°F)
Rev.: 04 / 11.2023
[PROG] button.
[PROG] button.
AB1701en_SA